View source for Pure Vanilla

{{NATS3 Manual
| show_billers_section = true
}}

{{Test Billers Disclaimer}}

== Setting Up on Pure Vanilla's Website ==

Before you can begin configuring PureVanilla as a [[Ct#Biller|biller]] in [[NATS3]], you must first register an account with them. This can be done through their website at http://www.purevanilla.com

While registering with Pure Vanilla, make sure to take down the Merchant ID, Username, Password, and Site ID that they provide for you. This information will be necessary for setting up Pure Vanilla in [[NATS3]].

Go to the Manage Sites tab and use the Add New Site link to setup a new site. The following options must be set.

* Select User Management Type: Using your own user management
* Receiver URL: <nowiki>http://linkdomain/signup/process_pvanilla.php</nowiki>
* Notification Method for Recurring Pmts: Notify by URL or Both

Replace ''linkdomain'' with your [[Common Terms#Link Domain|link domain]].

== Setting Up Pure Vanilla in NATS ==
=== Billers Admin ===

To begin setting up Pure Vanilla as a [[Ct#Biller|biller]] in [[NATS]], go to the [[NATS3 Billers|Billers Admin]]. Scroll down to the "Biller" drop-down menu, select Pure Vanilla, and click "Add."

'''Note:''' If you don't see Pure Vanilla as a [[Ct#Biller|biller]], [https://clients.toomuchmedia.com put in a support ticket], as you may need an updated version of [[NATS]].

When prompted, fill in the Merchant ID, Username, and Password that were provided to you by Pure Vanilla under the "Account Info" section. If you were not provided with this information, please contact your [[Ct#Biller|biller]] to receive it.

=== Sites Admin ===

Next, go to the [[NATS3 Sites|Sites Admin]], create or edit a [[Ct#Site|site]], and scroll down to the "Biller Details" section. Find the "Pure Vanilla" settings, and enter the Site ID for every [[Ct#Site|site]] you have set up with your [[Ct#Biller|biller]]. This can be found in the Pure Vanilla admin on their site -- just go to the "Manage Sites" page, and find the column labeled Site I.D.

After you fill out the available fields on this page, click Save. Pure Vanilla should now be ready and configured to process transactions in [[NATS3]].

[[Category:Not in NATS4 Yet]]
[[Category:NATS3 Billers]]