Difference between revisions of "Zombaio"

From TMM Wiki
Jump to navigationJump to search
m
 
(2 intermediate revisions by 2 users not shown)
Line 5: Line 5:
 
{{Test Billers Disclaimer}}
 
{{Test Billers Disclaimer}}
  
Register a [https://www.zombaio.com/index.asp Zombaio Account].  Record the Merchant I.D. and password Zombaio sends you -- you'll need this later.
+
== Setting Up on Zombaio's Website ==
 +
 
 +
Before you can begin configuring Zombaio as a [[Ct#Biller|biller]] in [[NATS3]], you must first register a merchant account with them. This can be done through their website at https://www.zombaio.com/index.asp/.
 +
 
 +
While registering with Zombaio, make sure to record the Merchant ID and Password that they provide for you. This information will be necessary for setting up Zombaio in [[NATS3]].
  
 
You don't need to give Zombaio a return URL, but you do need to set a postback URL for each of your sites.  Log into your Zombaio account, click the Tools button, select Website Management, and edit one of your sites.  In the ZScript field, enter the following URL:
 
You don't need to give Zombaio a return URL, but you do need to set a postback URL for each of your sites.  Log into your Zombaio account, click the Tools button, select Website Management, and edit one of your sites.  In the ZScript field, enter the following URL:
Line 15: Line 19:
 
Replace ''linkdomain'' with your [[Ct#Linkdomain|linkdomain]].  Repeat this step for each of your sites in Zombaio.
 
Replace ''linkdomain'' with your [[Ct#Linkdomain|linkdomain]].  Repeat this step for each of your sites in Zombaio.
  
While managing your sites, record their Zombaio site I.D. -- you'll need this later.  You'll also need the pricing structure numbers for each of your join options: click the Tools button, select Pricing structure, and record each pricing number.
+
While managing your sites, record their Zombaio site ID -- you'll need this later.  You'll also need the pricing structure numbers for each of your join options. To do so, click the Tools button, select Pricing structure, and record each pricing number.
 +
 
 +
== Setting Up Zombaio in NATS ==
 +
=== Billers Admin ===
 +
 
 +
To begin setting up Zombaio as a [[Ct#Biller|biller]] in [[NATS]], go to the [[NATS3 Billers|Billers Admin]]. Scroll down to the "Biller" drop-down menu, select Zombaio, and click "Add."
 +
 
 +
'''Note:''' If you don't see Zombaio as a [[Ct#Biller|biller]], [https://clients.toomuchmedia.com put in a support ticket], as you may need an updated version of [[NATS]].
 +
 
 +
When prompted, fill out your transaction and [[Ct#Chargeback|chargeback]] fees, along with when you want to deduct them. Fill in the Merchant ID and ZombaioGWPass (Digest Key) that they provide for you by Zombaio under the "Account Info" section and click Save. You can find your Zombaio Merchant ID and ZombaioGWPass (Digest Key) on Zombaio's website. Log in to the ZOA (Zombaio Online Administrator), and you will find this information on the dashboard under "Account Information." Your Merchant ID and ZombaioGWPass are NOT the same values as your ZOA login details.
  
== Set Up Zombaio in NATS ==
+
If you cannot find your Zombaio Merchant ID and ZombaioGWPass (Digest Key) in the ZOA (Zombaio Online Administrator), please contact their support department.
Go to [[Billers Admin]], select Zombaio from the Biller drop-down, and click Add.  Enter your Zombaio Merchant ID and ZombaioGWPass (Digest Key) and click Save. You can find your Zombaio Merchant ID and ZombaioGWPass (Digest Key)  in ZOA (Zombaio Online Administrator) on the dashboard under account information. Please note that the Merchant ID and ZombaioGWPass is not the same as your ZOA login details. If you cannot locate your Zombaio Merchant ID and ZombaioGWPass (Digest Key) in ZOA (Zombaio Online Administrator), please contact their support department.  
 
  
Go to [[Sites Admin]], go to the Biller Details section, find Zombaio, and enter the Site I.D. you recorded earlier.  You may also change the optional settings.  Click Save Changes.
+
=== Sites Admin ===
  
Scroll down to the Join Options section and edit an existing join option or create a new join option. In the Zombaio Pricing I.D. field, enter the pricing structure number you recorded earlier. Click Save.
+
Next, go to the [[NATS3 Sites|Sites Admin]], create or edit a [[Ct#Site|site]], and scroll down to the "Biller Details" section of the page. Find the "Zombaio" settings, and enter the Site ID for every [[Ct#Site|site]] you have set up with Zombaio. This information should have been provided to you by your [[Ct#Biller|biller]]. You can also set your default [[Ct#Join Form|Join Form]] Language, and choose whether or not you want to hide credits with the optional settings here. Save your changes once you have finished.
 +
 
 +
Once you have done that, scroll down to the "Join Options this Site Offers" section and create or edit a [[Ct#Join Option|join option]] to add Zombaio compatibility. Under "Biller Codes for this Join Option," enter your Zombaio Pricing ID. This corresponds the Pricing Structure number you recorded earlier from your [[Ct#Biller|biller]]. Click Save.
 +
 
 +
Please put the following:
 +
<pre>
 +
<input type="hidden" name="nextra[ZOMBAIO][Allow_ReSync]" value="0">
 +
</pre>
 +
 
 +
with the other hidden fields on your tour's join template that you plan on offering Zombaio join options.
 +
 
 +
=== Cross Sells ===
 +
 
 +
Zombaio also supports [[Ct#Cross Sell|Cross Sell]] transactions through [[NATS]]. In order to process cross sale transactions, however, you will first have to set them up with Zombaio. Please contact your [[Ct#Biller|biller]] for assistance with this.
 +
 
 +
To set up [[Ct#Cross Sell|cross sells]] in [[NATS]], go to the [[Cross Sells Admin]] and click "Incoming" or "Outgoing" from the navigation tabs at the top of the page (depending on whether you are receiving or sending the cross sale).
 +
 
 +
If you are sending a [[Ct#Cross Sell|cross sell]] to another [[Ct#Site|site]], go to the "Outgoing" section. Choose Zombaio from the [[Ct#Biller|Biller]] drop-down menu, and click Add. On the next page, you will be prompted to fill in the Title, Description, and Disclaimer for your cross sell option.
 +
 
 +
You will then need to fill out the [[Ct#Biller|Biller]] Info for your [[Ct#Cross Sell|cross sell]], which should be provided to you by Zombaio. Fill in your Pricing ID and Ref Code here, and choose if you want to Recalculate Ref Codes. Save your changes once you have filled out the provided fields.
 +
 
 +
If you are receiving the [[Ct#Cross Sell|cross sell]], go to the "Incoming" section. Choose Zombaio from the [[Ct#Biller|Biller]] drop-down menu, and click Add. When prompted, choose the [[Ct#Site|site]] and [[Ct#Program|program]] you want to associate with the [[Ct#Cross Sell|cross sale]] option, and fill in the "Comment" field.
 +
 
 +
Under "Data," fill in the Site ID and Pricing ID that you received when registering with Zombaio. Finally, fill in your desired [[Ct#Initial Bill|Initial]] Days (length of initial membership), [[Ct#Initial Bill|Initial]] Dollar (cost of initial membership), Recurring Days (length of recurring membership), and Recurring Dollar (cost of recurring membership). You can also choose if you want this [[Ct#Cross Sell|cross sell]] to be a [[Ct#Trial Sign-up|trial membership]] with the "This is a Trial" checkbox here.
  
 
== See Also ==
 
== See Also ==
 
* [[Upgrade Plus]] -- Let your trial members upgrade to full memberships.
 
* [[Upgrade Plus]] -- Let your trial members upgrade to full memberships.
 +
 +
[[Category:NATS3 Billers]]

Latest revision as of 15:14, 1 June 2011

NATS 3
  Biller Instructions
NATS3 Biller List
123Bill
365Billing
2000Charge
Aconti Payment Service
Allopass
Ampay
Argus
Authorize.net
Bill1st Gateway
Billing Line
BoaCompra
Card Gate Plus
CCBill
CCBill Direct Pay
CCBill Web900
Centrobill
ChargeMeLater
ClearCard
ClearCard IDV
Commerce Gate
CurePay
DHD Media
E-Pay Company
Edelweiss Card
EGatePay
ElectraCash
EMerchantPay (Interconsult)
EnterCharge
Epoch
EProcessingNetwork
EuroBill
EPGBill.com
FABILLING
Global Access
GTBill
GXBill
HeidelPay
HeidelPay Gateway
iBill
ICN Ltd.
Infinity Payment
Interconsult
Jettis
Jettis Gateway
Jettis International
Linkpoint
LocalBilling
Merchant Partners Gateway
Merchant Partners Membership
Merchant Solutions
MyVirtualCard
Netbilling
Netbilling Native
NetCash
Netpay International
NoCreditCard
Oakbill
Optimized Payment System
Password by Phone
Pay4
Paygea
Payment Network
Paysite Cash
PhoneAccess
Plug'n Pay
PPPCard
Probiller
Protx
Pure Vanilla
RocketGate
RocketGate Native
RSBilling
SafeCharge
Secure Billing World
SegPay
Sonic Bill
StandardBill
Streamate
Symmetrex
TrustCash
TrustCharge
txtNation
Ukash
Universal Processing
Verotel Pro
VXSBill
WebBilling
WebPay
WTS
WTSeu
YNOT Processing
Zombaio
Netbilling v3 Upgrade Instructions
Purchasing Tokens Through Netbilling
Streamate Biller versus Third-Party
Switching From Epoch to Epoch EU
Epoch Member Approval Plus
Multiple Biller Accounts

Please don't test your biller setup with Zombaio's test account—it won't work correctly.

Setting Up on Zombaio's Website

Before you can begin configuring Zombaio as a biller in NATS3, you must first register a merchant account with them. This can be done through their website at https://www.zombaio.com/index.asp/.

While registering with Zombaio, make sure to record the Merchant ID and Password that they provide for you. This information will be necessary for setting up Zombaio in NATS3.

You don't need to give Zombaio a return URL, but you do need to set a postback URL for each of your sites. Log into your Zombaio account, click the Tools button, select Website Management, and edit one of your sites. In the ZScript field, enter the following URL:

http://linkdomain/signup/process_zombaio.php

Replace linkdomain with your linkdomain. Repeat this step for each of your sites in Zombaio.

While managing your sites, record their Zombaio site ID -- you'll need this later. You'll also need the pricing structure numbers for each of your join options. To do so, click the Tools button, select Pricing structure, and record each pricing number.

Setting Up Zombaio in NATS

Billers Admin

To begin setting up Zombaio as a biller in NATS, go to the Billers Admin. Scroll down to the "Biller" drop-down menu, select Zombaio, and click "Add."

Note: If you don't see Zombaio as a biller, put in a support ticket, as you may need an updated version of NATS.

When prompted, fill out your transaction and chargeback fees, along with when you want to deduct them. Fill in the Merchant ID and ZombaioGWPass (Digest Key) that they provide for you by Zombaio under the "Account Info" section and click Save. You can find your Zombaio Merchant ID and ZombaioGWPass (Digest Key) on Zombaio's website. Log in to the ZOA (Zombaio Online Administrator), and you will find this information on the dashboard under "Account Information." Your Merchant ID and ZombaioGWPass are NOT the same values as your ZOA login details.

If you cannot find your Zombaio Merchant ID and ZombaioGWPass (Digest Key) in the ZOA (Zombaio Online Administrator), please contact their support department.

Sites Admin

Next, go to the Sites Admin, create or edit a site, and scroll down to the "Biller Details" section of the page. Find the "Zombaio" settings, and enter the Site ID for every site you have set up with Zombaio. This information should have been provided to you by your biller. You can also set your default Join Form Language, and choose whether or not you want to hide credits with the optional settings here. Save your changes once you have finished.

Once you have done that, scroll down to the "Join Options this Site Offers" section and create or edit a join option to add Zombaio compatibility. Under "Biller Codes for this Join Option," enter your Zombaio Pricing ID. This corresponds the Pricing Structure number you recorded earlier from your biller. Click Save.

Please put the following:

<input type="hidden" name="nextra[ZOMBAIO][Allow_ReSync]" value="0"> 

with the other hidden fields on your tour's join template that you plan on offering Zombaio join options.

Cross Sells

Zombaio also supports Cross Sell transactions through NATS. In order to process cross sale transactions, however, you will first have to set them up with Zombaio. Please contact your biller for assistance with this.

To set up cross sells in NATS, go to the Cross Sells Admin and click "Incoming" or "Outgoing" from the navigation tabs at the top of the page (depending on whether you are receiving or sending the cross sale).

If you are sending a cross sell to another site, go to the "Outgoing" section. Choose Zombaio from the Biller drop-down menu, and click Add. On the next page, you will be prompted to fill in the Title, Description, and Disclaimer for your cross sell option.

You will then need to fill out the Biller Info for your cross sell, which should be provided to you by Zombaio. Fill in your Pricing ID and Ref Code here, and choose if you want to Recalculate Ref Codes. Save your changes once you have filled out the provided fields.

If you are receiving the cross sell, go to the "Incoming" section. Choose Zombaio from the Biller drop-down menu, and click Add. When prompted, choose the site and program you want to associate with the cross sale option, and fill in the "Comment" field.

Under "Data," fill in the Site ID and Pricing ID that you received when registering with Zombaio. Finally, fill in your desired Initial Days (length of initial membership), Initial Dollar (cost of initial membership), Recurring Days (length of recurring membership), and Recurring Dollar (cost of recurring membership). You can also choose if you want this cross sell to be a trial membership with the "This is a Trial" checkbox here.

See Also

  • Upgrade Plus -- Let your trial members upgrade to full memberships.